There are two questions that should be considered when choosing the right boat: "What will be the fishing for?" and "where will the fishing activities be?" Always look for the signs of quality check the carpet and the compartments - they could be plastic, metal or fiberglass. Look at the little but very important things like the 1000 GPH bilge pump, the six gauge wiring instead of ten or eight that is because heavier wires gives more power from the battery up to the trolling motor.
There is Five Star Advantage that ranger dealers often speak to their customers: Quality, Safety, Innovation, Performance, and Value. Below is a list of “must have” things when buying your first boat.
Tow Vehicle - This is one of the most important piece of your equipment, ensured that has the rating to get the job done like loading up to 3500 lbs. of weight that could easily pull the boat up the hills and mountainous treks.
Bass Boats - For first timers, consider a second hand boat. This will be a trial and error stage where fishing skills can be tested. Consider a larger boat, which is about 19 feet with 20 to 30 miles speed for larger bodies of water.
Aluminum - In smaller lakes, a 16-18 foot aluminum boat is a good choice. It is cheaper than fiberglass and more forgiving of bangs, running up into shallows and hitting stumps and rocks. The only downside is that it rides rougher even with the slightest winds.
Fiberglass - This two-stroke engine is much more expensive which could cost from $20,000 to as much as $50,000. The good thing with this boat is that it could handle bigger, rougher water and still give you a smooth ride.
Brand new versus Second Hand - Buying a second hand boat is not only cheaper but holds their value longer and better. The downside is that you'll probably inherit someone else's troubles. During casual inspection, outboard engines problems are not easily identified. The best thing to do is bring someone you trust with you to inspect a prospective boat or buy from someone you know instead.
Handling the Boat - Listen to the pitch change when trimming down. Although it will be very difficult for beginners like trying to launch and retrieve the boat backing it down the ramp. Never worry, because everyone passed that stage and there's no boat owner that is not willing to help a first timer learn. Sometimes all it takes is just 4 hours to learn the basics.
Buying a dreamboat is very exciting. It is not the boat that really matters but the experiences that come with fishing.
There will always be challenges whether one decides to fish either in the river or in the open sea. The important thing to remember is to have patience waiting for the fish and doing the best to catch it when it appears.
To be able to fish, a person would need to get a fishing license since this is requirement by law and the regulations regarding fishing varies from one state to the other.
Getting the right equipment for fishing is also an important factor in making that experience a memorable one. Using the wrong kind of fishing line or one that is made of poor quality will cause many problems such as tangles and lost fish.
There are 4 kinds available in the market. These are monofilament, braided, fused and fluororcarbon.
The Monofilament fishing line is the most popular of the four since it has been around for a very long time. It also works well in different fishing conditions. The problem with this line is that it has “memory.” This means that it has a tendency to keep to a certain shape if stored for some time. If a person does not fish often, it is best to purchase a line that is not very long and it is advisable to change it every time one goes out fishing.
Braided fishing lines are the strongest of the 4 available. These lines don’t stretch and are quite easy to see since the woven nature of the line makes it float. The bad part about this line is also about its strength that causes abrasions on other things like one’s hands, the fishing rod and the line that guides the reel. As such, one should have the right hardware around when using it.
Fused fishing lines are similar to braided fishing lines. The only difference is in the manufacturing process where fused lines are glued together with a coating applied over it instead of woven. This makes fused fishing lines share some of the difficulties with braided fishing lines such as making it difficult to cut without a sharp knife or scissors, its tendency to slide around a bit on the reel spool and its visibility to fish which will make catching fish a bit challenging.
Fluorocarbon fishing lines are getting more popular these days since fish are not able to see it in the water.
This website uses cookies that are necessary to its functioning and required to achieve the purposes illustrated in the privacy policy. By accepting this OR scrolling this page OR continuing to browse, you agree to our Privacy Policy